996 Carrera Group 1 – Part 1 Engine / PAGE 137
20. Push the G-ring carefully awayfrom the · cQnicalsleeve with the A-side(thin wall) of
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine, crankcase, suspension
20. Push the G-ring carefully awayfrom the
cQnicalsleeve with the A-side(thin wall) of
the cylinder sleeve.
B
242_99
22. Mountsealing washers (dry) and press
slightlywith B-side of cylinder sleeve.
243_99 23. Screw on multiple-toothnuts (thread oiled) by
hand.
24. Proceed in the same way with both studs on
the right crankcase half (area of bearing 1).
25. Mounthexagon nut MID x 1.25 and washer
AID.5 on stud, with rounded side pointing IL
towards the hexagonnut.-/7) I
) r~
241_99
21. R~moveconical sleeve and carefullypush
round seal to its end position with the B-side
(thick wall) of the cylinder sleeve,while
bracing the bolt head.
244_99
10 10 37 Disassembling and assembling crankcase -GT3 10 -221
Printed in Germany -32, 1999 99610201
This is a source reference. Confirm exact model applicability in the original material.