996 Carrera Group 1 – Part 1 Engine / PAGE 146
13 82 19 Removing and installing tensioning roller for drive belt · I '"
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Crankshaft, pistons
13 82 19 Removing and installing tensioning roller for drive belt
I'<:"~
I '" '-' ~~ :, cJ::.1 ~I
1) " ~\
If ~ "
'-
\
2
328-97
Note:
No. Designation Qty. Removal Installation
1 Tensioningroller 1 Undo at the hexagon Tighteningtorque 60 Nm
with spacer ring (wrench size: 24) and simul- (44 ftlb.)
taneouslycounter at the Counter at the hexagon-
hexagorrheadbolt head bolt whentightening
(wrenchsize 15).
2 Hexagon-headbolt 1 This is not not required for a thin coat of
(micro-encapsulated) removal and installation of screw locking lacquer tothe
the tensioning roller. thread of the hexagon-head
The hexagon-headbolt can bolt.(Observe
be removed only after the note)
belt tensioner or the
bracket has been loosened.
Note: Either the screw locking lacquer Loctite 242 "Mitlelfest"(medium strength) or screw locking
lacquer Loctite 270 "Hochfesf' (high strength)can be used. If screw locking lacquer 270 is used,
coat only the first four threads.
13 -7
Apply.:-"1r:~---I
This is a source reference. Confirm exact model applicability in the original material.