Installing belt tensioner · No. Procedure Instructions

Installing belt tensioner No. Procedure Instructions 1 Installing hydraulic pump Fasten bracket with tensioning elementon the crankcase. Tighteningtorque: 23 Nm (17 ftlb.) Insert hydraulicpump from the rear and fasten. Tighteningtorque: 23 Nm (17 ftlb.) 2 Fitting steering return line Insert line into the plug~ncoupling in a straight line. Then pull slightlyto ensure that the connection is properly locked. 3 Fittingsupplytank for power Turn bayonetlock to its initial position, steeringsystem 4 Fitting supply tank for power Removeplug. Positiontank (observe markings). Lock bayo- steering system net lock. 5 Fitting drive belt. Fit belt pulley of the hydraulic pump and screw in hexagor}. head bolts. Fit drive belt. Assemblyinstructions on Page 13-1 6 Fasteningbelt pulleyfor hydraulic Tightenthreehexagon-headbolts. Tightening torque: 23 Nm (17 ftlb.] pump Note The belt pulleycan also be held and tightened with a restraining strap before the drive belt is fitted. Fasten air conditioningcompressor. Tighteningtorque: 28 Nm (21 ftlb.) Fastengenerator. Fit throttle body and air cleaner assembly. 13 -18 13 73 19 Removing and installing belt tensioner