YOUR RESEARCHShift-i
1 matching discussions were examined; no attributable action/outcome evidence was detected. No consensus or repair conclusion is claimed.
Source reports, not a diagnosis or a success probability. Counts refer to discussions and can overlap.
Read captured repliesInsufficient extracted evidence does not mean there is no answer in the original discussions.
1 matching discussions · 4 captured posts examined · 1 partial discussions
Counts describe captured discussions, not unique people or a diagnosis. Author identities are not reliably stored. Exact duplicate evidence is counted once across matching discussions; one discussion counts at most once per action/state. Multiple repairs reported together remain a combination. Suggestions and failed attempts do not establish a fix. Matches cover whole discussions and can include related faults, model variants and incomplete threads.
4 eligible posts · 0 unverified posts · 1 discussions match the subject in their title or opening post.
0 evidence records excluded for query context · 0 excluded by outcome qualification · 0 adjusted by outcome qualification.
0 acknowledgements have no verified action link; they do not establish a repair result.
Generation: 20261027T035758Z · outcome-qualification-6. Deterministic extraction; no AI model inference. How we use sources
Hi, Has anyone wired up a SHIFT-i LED shift indicator light system to a 987? I'm just about to try and wondered where is easiest to get the Tacho signal wire? It needs to be a wire carrying the RPM information - so it could be from the tacho, or the coils or the ECU... https://ecliptech.com.au/shift-i/ Ta HH
For 987.1 you can tap into the OBD port wires, lookup boxster and 997 installs. The OBD port is clipped in with 3 clips, squeeze those and push it up into the dash to release it. For 987.2 cars, that wire is no longer there, you have to tap into the DME harness back in the trunk. Upper connector on the DME, tap one of the wires going to pin 78, 79, or 80 will work. You will need to unwrap the cloth tape quite a bit to get there.
Many thanks. Much appreciated. HH
I just had one installed. The shop had to tap into a signal at the engine. 5 hours of labor was very painful. And unanticipated.
This is a source reference. Confirm exact model applicability in the original material.
