Hi all, My top has been acting up sometimes lately, so today I checked the hydraulic fluid, saw it was right at the min mark, and filled it to the max mark. Since I'm not sure if that will help or not, I thought I would also calibrate using the Duramatric, since today is a day the top is deciding to work. Has anyone done this successfully? When I click "start" the LED on the cable flashes red then green repeatedly, my cursor goes to the hour glass, but then nothing happens. I waited several minutes, but nothing was happening so I clicked stop. I lowered the top with the button on the dash, clicked "start" again, and the same thing happened. Any thoughts? If you're curious about the top problem, sometimes when closing, it will stop about two seconds too soon, and I will have to release the button, then press again to finish closing. Also, sometimes I try to lower it, and it will flash the light on the dash, I'll hear two clicks behind me, but then nothing happens. Seems to be sporadic and only work when it wants to. Hopefully it will always work now that the reservoir is full.
Discussion summary
YOUR RESEARCHCalibrate Top With Durametric?
1 matching discussions were examined; no attributable action/outcome evidence was detected. No consensus or repair conclusion is claimed.
Source reports, not a diagnosis or a success probability. Counts refer to discussions and can overlap.
Read captured repliesInsufficient extracted evidence does not mean there is no answer in the original discussions.
1 matching discussions · 2 captured posts examined · 0 partial discussions
Coverage and how to read this overview
Counts describe captured discussions, not unique people or a diagnosis. Author identities are not reliably stored. Exact duplicate evidence is counted once across matching discussions; one discussion counts at most once per action/state. Multiple repairs reported together remain a combination. Suggestions and failed attempts do not establish a fix. Matches cover whole discussions and can include related faults, model variants and incomplete threads.
2 eligible posts · 0 unverified posts · 1 discussions match the subject in their title or opening post.
- Rennlist: 1 discussions
0 evidence records excluded for query context · 0 excluded by outcome qualification · 0 adjusted by outcome qualification.
0 acknowledgements have no verified action link; they do not establish a repair result.
Generation: 20261026T205155Z · outcome-qualification-6. Deterministic extraction; no AI model inference. How we use sources
For technical support on how to calibrate the top with Durametric....contact Durametric Intermittent operating convertible top is most likely the microswitches, parking brake switch, or the 2 flaps in the back getting stuck (quite often I have to tap the one on the drivers side to get it moving...)
This is a source reference. Confirm exact model applicability in the original material.