Cross Post from HPDE / Racing What is the acceptable range of water temp for a street driven 996 on track days? What is the point at which you should pit if it gets too high. I have a dash mounted OBD II Scan gauge. I can monitor water temp and MAP Air temp, but not oil temp. I am starting to experiment with higher rpm (lower gear) driving and seeing water temps up 7-8 degrees hotter. Ambient temp ranges 70 - 83 degrees. Any input would help. Some summer track days ahead, I don't want any surprises. David
Discussion summary
YOUR RESEARCHAcceptable water temps for a 996 Cross Post
1 matching discussions were examined; no attributable action/outcome evidence was detected. No consensus or repair conclusion is claimed.
Source reports, not a diagnosis or a success probability. Counts refer to discussions and can overlap.
Read captured repliesInsufficient extracted evidence does not mean there is no answer in the original discussions.
1 matching discussions · 2 captured posts examined · 0 partial discussions
Coverage and how to read this overview
Counts describe captured discussions, not unique people or a diagnosis. Author identities are not reliably stored. Exact duplicate evidence is counted once across matching discussions; one discussion counts at most once per action/state. Multiple repairs reported together remain a combination. Suggestions and failed attempts do not establish a fix. Matches cover whole discussions and can include related faults, model variants and incomplete threads.
2 eligible posts · 0 unverified posts · 1 discussions match the subject in their title or opening post.
- Rennlist: 1 discussions
0 evidence records excluded for query context · 0 excluded by outcome qualification · 0 adjusted by outcome qualification.
0 acknowledgements have no verified action link; they do not establish a repair result.
Generation: 20261027T011819Z · outcome-qualification-6. Deterministic extraction; no AI model inference. How we use sources
I've seen water temps go as high as 210 on my car in 80+ degree weather at the end of a 25-30 minute run. ideally, I'd prefer if they were below 200. This was with a new water pump and all 3 CFS radiators. I monitored oil temp and it would regularly get to 230-240 after about 10-15 minutes. I had a 2 qt mantis pan with a oil cooler that ran up front, so that helped. I'd say 210 is probably safe....ish....
This is a source reference. Confirm exact model applicability in the original material.
