POST 1 / ORIGINAL POSTEROriginal post
I'm thinking that I am missing something here. The plastic piece that holds the halogen bulb in doesn't seem to fit.... at all.
11 captured repliesDiscussion pagination complete · Source accounts, not a confirmed diagnosis
Discussion summary
YOUR RESEARCHIssue with halogen light holder
1 matching discussions were examined; no attributable action/outcome evidence was detected. No consensus or repair conclusion is claimed.
Source reports, not a diagnosis or a success probability. Counts refer to discussions and can overlap.
Read captured repliesInsufficient extracted evidence does not mean there is no answer in the original discussions.
1 matching discussions · 11 captured posts examined · 0 partial discussions
Coverage and how to read this overview
Counts describe captured discussions, not unique people or a diagnosis. Author identities are not reliably stored. Exact duplicate evidence is counted once across matching discussions; one discussion counts at most once per action/state. Multiple repairs reported together remain a combination. Suggestions and failed attempts do not establish a fix. Matches cover whole discussions and can include related faults, model variants and incomplete threads.
11 eligible posts · 0 unverified posts · 1 discussions match the subject in their title or opening post.
- Rennlist: 1 discussions
0 evidence records excluded for query context · 0 excluded by outcome qualification · 0 adjusted by outcome qualification.
0 acknowledgements have no verified action link; they do not establish a repair result.
Generation: 20261026T181445Z · outcome-qualification-6. Deterministic extraction; no AI model inference. How we use sources
POST 2 / ORIGINAL POSTEROriginal post
I guess I'll try to elaborate, the 3 parts where the plastic is supposed to hold the light to the red/brown part of the headlight housing barely touch or don't touch it at all. I just cant see how these would be made like this but I am lost in trying to figure this out
POST 3Original post
Sounds to me like the bulb is not in correctly. Might try turning the bulb a little bit to see if it seats further into the socket, then install the holder.
POST 4Original post
The 3 tabs on the holder, one of them is different size. Has to be in the exact orientation. If thats what you mean. I wish they kept the clip like the .1 version
POST 5 / ORIGINAL POSTEROriginal post
Tomorrow I'll take some pictures but even when i rotate it around the plastic piece is too small and barely touches the mounting area. I even bought new ones with the hope that somehow mine had shrunk. But the new ones are the same size
POST 6 / ORIGINAL POSTEROriginal post
This doesn't seem to fit....
POST 7Original post
Quotes source post: 14949107
Ok, the smaller tab thats at the 10 oclock in your picture need to be at 6 clock! It appears smaller but if you get it line up it will fit.
POST 8 / ORIGINAL POSTEROriginal post
The problem is that its like the plastic is too small. Doesn't matter how you rotate it.
POST 9Original post
Quotes source post: 14949618
That looks about right. Only the edge go into the position. I know it sounds weird but once you have it lined up it fits. If you haven't figured it out, I may have some time this weekend and I will snap some pictures of mine as I may try to install HID in mine.
POST 10 / ORIGINAL POSTEROriginal post
If you can that would be great. This has to be the worst design ever.
POST 11Original post
Sorry I forgot about this thread and it got buried pages deep.
This is a source reference. Confirm exact model applicability in the original material.