Workshop ManualsOriginal source
Oil Cooler, Engine|Service and Repair|Page 1747
Add to repair workspace
Page 4
6.1 Turn adjusting ring counterclockwise to its original position.
6.2 Push reservoir downward and turn adjusting ring clockwise until the marks line up.
6.3 Fill in Pentosin. Observe the specification for bleeding.
7. Check grooves of drive belt for foreign bodies. Fit drive belt. Observe sequence when fitting the belt and direction of motion if the belt was run.
8. Fit air cleaner assembly.
9. Fill in coolant and bleed the system.
10. Perform tightness test.
This is a source reference. Confirm exact model applicability in the original material.