Throttle Position Sensor|Testing and Inspection|Page 2817

Page 2 6. Undo the two inner screw-type hose clamps -arrows- and turn the throttle body upward. 7. Remove the oil filter housing. 8. Undo the throttle potentiometer. Unscrew the two cross-recess screws -arrows- for this purpose. Carefully take off the throttle potentiometer. Installing Throttle Potentiometer NOTE: Always replace the sealing ring of the throttle potentiometer. 1. Push the throttle potentiometer onto the throttle axle. Put on and tighten the two cross-recess screws. 2. Install the oil filter housing.