Workshop ManualsOriginal source
Throttle Position Sensor|Testing and Inspection|Page 2836
Add to repair workspace
Page 3
3. Move the throttle body into position and fasten. Tighten the two inner screw-type hose clamps
-arrows-
for this purpose.
4. Push on plug of the idle speed control
-arrow-
.
5. Push on plug of the throttle potentiometer
-arrow 1-
.
View of components from below
6. Push the two oil container vent hoses
-arrows-
onto the throttle body and fasten the screw-type hose clamps.
This is a source reference. Confirm exact model applicability in the original material.