Vacuum Reservoir, Variable Induction|Service and Repair

Page 1 Vacuum Reservoir: Service and Repair Removing And Installing Vacuum Reservoir (Engine Removed) - GT3 NOTE: Observe position of the components and the hose routing plan. Removing Vacuum Reservoir 1. Remove oil container. 2. Unscrew the cross-recess screw on the vacuum reservoir -arrow- . 3. Pull the vacuum hose off the vacuum reservoir. 4. Remove vacuum reservoir. To do this, carefully press the vacuum reservoir out of the holder. Installing Vacuum Reservoir 1. Carefully press the vacuum reservoir into the holder; make sure it is seated properly. 2. Push the vacuum hose onto the vacuum reservoir. 3. Put on and tighten the cross-recess screw -arrow- . 4. Install the oil container.