Workshop ManualsOriginal source
Variable Induction Control Actuator|Service and Repair|Page 3070
Add to repair workspace
Page 2
1. Fasten vacuum modulator on the tuning pipe. Put on and tighten the two cross-recess screws
-arrows 2-
for this purpose.
2. Push on vacuum hose
-arrow 3-
.
3. Carefully push the ball socket
-arrow 1-
onto the shaft of the tuning pipe flap; make sure it is seated properly. If necessary, grease the inside of
the ball socket for easier fitting.
This is a source reference. Confirm exact model applicability in the original material.