Page 1
Shift Interlock Solenoid: Service and Repair
Removing and installing shiftlock solenoid
Removal
1. Remove center console.
2. Remove and install selector support.
3. Remove cover plate on selector lever support.
4. Pull off cable on manual switch, unclip holder for plug connection and remove cable from the cable guides.
5. Pull solenoid holding clip only far enough away to permit the solenoid can be removed. Do not overstretch the holding clip.
Installation
1. Fit solenoid in correct position and properly route cable underneath the cable guides (see Figure).
2. Plug cable onto manual switch according to wiring diagram and fasten plug connection with holder on the selector support.
This is a source reference. Confirm exact model applicability in the original material.