Page 5
5. Insert B+ wire into the slot of the rubber sleeve and carefully press sleeve into the body opening.
6. Fasten cable on support bracket.
7. Press cable end piece onto the transmission lever using a pair of pliers. The end piece must be felt to engage.
8. Install transmission support and cross member.
9. Install parking brake console. Observe routing of the cable.
10. Engage cable on support bracket (2).
11. Move selector lever to position "P", engage cable into the open adjuster (1) and close the adjuster (3). The locking sleeve must move to the end
position automatically.
12. Check adjustment of selector lever cable.
13. Adjust parking brake.
14. Install center console.
15. Install selector knob.
16. Fit underbody panels (middle and rear).
This is a source reference. Confirm exact model applicability in the original material.