Page 1
Torque Converter: Service and Repair
Removing and installing torque converter
Tools
Notes on removal and installation
Removal
1. Remove multi-function switch.
2. With transmission in horizontal position, carefully remove the converter.
Installation
Note:
Check converter hub for traces of scoring. In the event of damage or faults, the complete converter must be replaced.
1. Carefully push converter onto transmission shaft as far as the first stop. Then press converter by hand into the converter bell housing and turn it
until the recess in the converter hub engages in the driver of the impeller and the converter perceptibly slides inward.
This is a source reference. Confirm exact model applicability in the original material.