Page 1
Pressure Plate: Service and Repair
Removal and Installation
Removing and installing clutch
Tools
Assembly instructions
Removal
1. Remove manual transmission. See: Manual Transmission/Transaxle/Service and Repair
2. Fasten toothed segment (special tool 9538/1) on the crankcase half (cylinder bank 1 - 3) with hexagon-head bolt M12 x 50.
3. Detach thrust plate.
Note:
In order to avoid deformation of the thrust plate housing, always loosen screws in several stages and in diametrically opposite sequence.
This is a source reference. Confirm exact model applicability in the original material.