Page 2
Cutaway view of components
Note:
The sealing rings can also be replaced with the transmission installed.
Removal
1. Remove right halfshaft flange. To do this, place a chisel or spacer "A" under the halfshaft flange and pull out the halfshaft flange by turning the
screw "B".
Note:
Pull out left halfshaft flange by screwing in the hexagon-head bolts "A" on alternate sides. The bolts must be supported on the rib
reinforcements of the cover (see Figure).
2. Lever out sealing ring using a suitable tool.
This is a source reference. Confirm exact model applicability in the original material.