Page 2
Tools
Assembly:
1.
Preparatory work
1.1
Remove center console --> POSES, Workshop Manual, Serv. No. 6817 "Removing center console".
1.2
Remove gearshift bracket
1.2.1 Put gearshift lever in neutral.
1.2.2 Remove locking clips --> Figure 3 -A- on support --> Figure 3 -B-.
1.2.3 Pull support --> Figure 3 -B-.
Note
Do not loosen the locking sleeves figure 4 -A- of the shift and selector cable.
1.2.4 Lever off shift cable --> Figure 4 -B- at the gearshift lever.
To do this, insert a large screwdriver through the side opening in the gearshift bracket and press end of shift cable down off the ball head.
1.2.5 Remove protective cap --> Figure 4- C- and pull off selector cable --> Figure 4 -D-.
1.2.6 Unscrew nuts --> Figure 5 -A- and remove gearshift bracket.
This is a source reference. Confirm exact model applicability in the original material.