Page 2
-
Fit
new
expanding spring,
new
retaining pin and
new retainer (safety bracket)
(arrow).
These parts are available as a repair set and must be
"renewed" each time the pads are changed.
-
Insert the warning contact wire and warning contacts.
-
Firmly press the brake pedal several times with the vehicle stationary so that the brake pads assume their fit in accordance with the operating state.
Next, check and, if necessary, correct the brake fluid level.
Bedding in the brake pads
New brake pads require a bedding-in period of approx.
200 km
. Not until then do they achieve their best friction and wear coefficient. During this
period, the brakes should be subjected to full stress when travelling at nigh speed only in emergencies.
This is a source reference. Confirm exact model applicability in the original material.