Page 3
Difference in the push rods:
-
Push rods -12.1- with thread and fastening nut -13.1- in place of push rod -12- with retainer -13-.
-
A guide for the bellows -arrow- is present in the previous push rod -9-. A guide is not present and not permissible in the new push rod -9.1-!
Removal
1. Switch off ignition. Remove cover -A + B- and battery cover.
2. Remove spare wheel (if present).
3. Remove brake booster.
Note!
-
To remove and install brake booster -C-, the brake master cylinder -B-, the hydraulic unit -D- and the booster pump -A- in vehicles with PSM most
be removed!
-
The assembly of the brake master cylinder -B- with the brake booster -C- must not be disconnected for removal and installation if both parts
should be continued to be used!
4. Remove battery -1- (necessary to remove intermediate piece no. 11)! Remove alarm horn on the intermediate piece -11-.
5. Undo intermediate piece -11- -arrow- (2 M8 nuts and hexagon socket head bolt) and remove in the direction of the battery. Unclip air-conditioning
line -2- from the holder.
This is a source reference. Confirm exact model applicability in the original material.