Page 5
4. Push plugs onto induction coil, lock barrel, ignition starting switch and onto the signal converter.
5. Steering lock function (perform locking pin function and keylock function tests).
6. Insert steering column cover from below, position and fasten (with Torx screws).
7. Install steering column switch and airbag contact unit with the associated covers. Position the steering column switch before tightening the
fastening screw. To do this, measure with a depth gauge between the end of the steering shaft and the sheetmetal cover of the steering column
switch. Adjusting distance
55 ± 0.5 mm
The adjusting dimension
55 ± 0.5 mm
can also be adjusted or measured with the airbag contact unit fitted.
This is a source reference. Confirm exact model applicability in the original material.