Page 6
8. Install the instrument cluster. Connect the electrical plug connection on the instrument cluster. Push in the instrument cluster at the left and right
and clip into place; fasten it with the Torx screws 5.0 x 22. Press in the hazard warning light switch and fit the plug on the left side. On the
"telephone with handsfree unit" variant, plug in the microphone plug instead and engage the microphone in position.
9. Install side nozzle and main light switch.
10. Install steering wheel and airbag unit. Observe the safety regulations for handling airbag units. Refer to Air Bags and Seat Belts.
11. Connect battery ground cable. Perform function test.
12. If a new transponder (new lock barrel with new key) is used, the new key must be taught.
Note:
The transponder is located in the key head. The new transponder is taught with the Porsche System Tester 2. A new transponder can be
taught to the vehicle in the system "Alarm system", menu "Teaching function s"/submenu "Transponder key". Access to WAS is necessary in
order to teach the transponder.
The transponder does not have to be taught if:
-
the previous key head A (handheld transmitter) is fitted on the new key C. Refer to Disassembling and assembling handheld transmitter.
-
a new lock barrel with defined locking is installed (the entire previous key can thus be used).
-
the previous lock barrel with key is used. Refer to Removing and installing lock barrel.
This is a source reference. Confirm exact model applicability in the original material.