Page 5
-
Fit brake disc cover and retainer plate (lid). Unless there is a water drain on both sides, fit the water drain (arrow) in the correct position - i.e.
facing downward. Use correct tightening torques. Brake disc cover =
10 Nm (7.5 ft. lbs.)
Retainer plate =
37 Nm (27 ft. lbs.)
-
Press in wheel hub.
To do this, place the wheel hub on the wheel centering device and press it on the wheel bearing inner race using pressure piece VW 415 A (tool
C).
This is a source reference. Confirm exact model applicability in the original material.