Page 1
Wheel Fastener: Specifications
TIGHTENING SPECIFICATIONS
Wheel Bolts .................................................................................................................................................................................. 130 Nm (96 ft. lbs.)
NOTE:
^
Screw in wheel bolts by hand and then tighten evenly.
^
Start at the top when tightening.
NOTE:
^
Apply a thin coating of Optimoly TA, or equivalent, aluminium paste to the thread, shank and below the head of the wheel bolts (between bolt
head bearing surface and spherical cap ring).
^
Do not coat the spherical cap bearing surface facing the wheel.
^
If heavily contaminated, clean screws first with a lint-free cloth.
This is a source reference. Confirm exact model applicability in the original material.