Page 1
Condenser Fan: Service and Repair
Removal
1. Remove front wheel, wheel housing liner and wing support.
2. Detach cooler bracket from the body (1 nut 2 M8 screws). Unclip ventilation hose and ballast resistor. Undo retaining clips from the cooler and
pull off the cooler bracket downwards.
3. Disconnect the electrical plug connection and undo retaining clips from the fan housing. Pull fan housing out of the holder bending up the
ventilation hose on the cooler at the same time.
This is a source reference. Confirm exact model applicability in the original material.