Page 1
Control Assembly: Service and Repair
Climate Control Panel
Installing and Adjusting Bowden Cables
Note
: This procedure is applicable to vehicles with heating/ventilation system only. This does NOT apply to vehicles with air conditioning.
NOTE
: Install the heating/fresh-air control with installed bowden cables. The sleeves of the bowden cables are adjusted at the fastening points on the
heating/fresh-air unit.
Adjusting temperature valve
1. Turn temperature control to left-hand stop (cold). Temperature valve closed; no passage to the heat exchanger.
2. Engage bowden cable in the adjusting lever.
This is a source reference. Confirm exact model applicability in the original material.