Workshop ManualsOriginal source
Discharge Air Temperature Sensor / Switch, HVAC|Service and Repair
Add to repair workspace
Page 1
Discharge Air Temperature Sensor / Switch: Service and Repair
Removal
1. Remove footwell bulkhead. Unclip center console cover at the front and remove the toot- well vent (3 screws).
2. Turn blower outlet sensor by
90 °
and pull it out.
3. Pull electrical plug connection off blower outlet sensor.
Installation
1. Position temperature sensor on the heating/air-conditioning unit housing and turn by
90 °
(tighten).
2. Engage electrical plug connection and route wire carefully.
This is a source reference. Confirm exact model applicability in the original material.