Page 2
fitting
-5-
tight. Position the cover
-1-
on the fastening screw
-2-
.
-
Use the foam part
-4-
for the Club Sport version.
-
For the Cup racing version, mount the bushing
-6-
instead of the foam part.
Tightening torque:
50 Nm (37 ftlb.)
4. Loop technique for fastening the seat belt to the bucket seat cross member
1. Loop the belt strap in the direction of the arrow
-inset-
around the transverse strut on the roll cage into the adjustable slider. The projection
-dimension = X-
of the belt strap must be at least
100 mm
.
2. Roll up the projecting belt strap and bind it with a tie wrap
-1-
.
This is a source reference. Confirm exact model applicability in the original material.