Page 1
Impact Sensor: Service and Repair
Removing And Installing Sensor For Side Airbag
Remove sensor for side airbag
NOTE:
-
Sensors for triggering the side airbag unit are fastened on the inner lower side member on the left and right-hand sides in the vehicle.
-
After an accident, the sensor of the triggered side airbag unit must be examined for damage and replaced if necessary.
-
The sensor must be replaced after the side airbag has been triggered for the third time
-
Safety conditions must be observed when handling airbags. Refer to "Safety regulations for vehicles with airbag and belt tensioner".
-
Remove front seat. Refer to Removing and installing front seat
-
Remove the side lining at rear. Refer to Removing and installing side lining
-
Remove sill. Refer to Removing and installing sill
1. Disengage floor covering at the support and lay it in the vehicle interior.
2. Unlock locating peg
-1-
of the support using the commercially available removal tool. => "Tools"
This is a source reference. Confirm exact model applicability in the original material.