Page 2
Installing Display And Operator Control Unit (PCM 2)
NOTE:
-
If a "new" PCM is installed, the navigation module from the "old" PCM is removed and installed in the "new" PCM.
-
If the "old" PCM is installed again, start at step 6.
1. Before the "new" PCM is installed, release and unplug the protective plug
-A-
for the optical waveguide.
2. Unclip the cover on the "new" and "old" PCM.
3. Lever out the navigation module carefully using a screwdriver on the removed PCM.
4. Push navigation module into the PCM to be installed.
This is a source reference. Confirm exact model applicability in the original material.