Page 3
5. Position the cover and clip it in.
6. Connect the electrical plug connections of the display and operator control unit in the order
-D, B, A-
and the antenna plug
-A, E, F-
, until the plug
engages audibly.
7. Check if the locking tabs on the PCM protrude
-arrow-
, and if so, open the locking with an Alien wrench.
NOTE:
Before the PCM is inserted into the installation slot, it must be ensured that the electrical lines are not squeezed and damaged by the
PCM.
8. Push the PCM into the installation slot until the locking elements on the PCM housing engage.
This is a source reference. Confirm exact model applicability in the original material.