Page 2
Part Numbers
Tools:
Pointed-nose pliers
Curved pointed-nose pliers
Slotted screwdriver (small)
Work Procedure:
Modifies the water drains in front cowl area, MY '99 only.
1.
Raise vehicle on lifting platform.
2.
Remove the front cowl area covers and the battery cover, see 911 Carrera Technical Manual (996), Group 7, Repair, 70 22 19 Removing/Installing
cowl panel cover.
3.
Work on water drain to the right of the battery (see Figure shown in parts numbers, arrows A and B) (change rubber sleeve).
Caution!
Paint damage/corrosion can be caused by improper handling of the tool!
>
Work carefully when removing the rubber sleeves.
3.1
Remove rubber sleeve (arrow A).
To do so, push a small slotted screwdriver between the rubber sleeve (arrow A) and the drainage hose (arrow B) and undo the drainage hose
from the rubber sleeve. Push the drainage hose down as far as possible and out of the rubber sleeve.
3.2
Remove rubber sleeve upwards using a pair of curved pointed-nose pliers. The drainage hose (arrow B) can not be removed and remains in
the vehicle without being used.
3.3
Install new rubber sleeve 999.703.484.40. To do so, press the drainage hose to one side if necessary. Dampen the outside of the rubber
This is a source reference. Confirm exact model applicability in the original material.