Page 3
-> 3.5 "Component materials for Porsche vehicles"
F 1.2.2.2 Knowledge during painting (Sections 4 to 8)
These Sections describe the painting procedures, listed according to paint supplier.
There are four different repair levels, which are categorized into four time phases in parallel with the processes in the workshop.
Section 4 allows users to determine the appropriate painting procedure for their repair jobs. Users can then carry out the procedure step-by-step in
Sections 5 to 8.
See: Section G4
See: Section G5
See: Section G6
See: Section G7
See: Section G8
F 1.2.2.3 Material data (Section 9)
See: Section G9
This section provides the spray painter with the material data sheets containing precise material data, information and order numbers in accordance with
supplier specifications and an overview of the topicality of the materials and the various ways in which the materials can be combined.
F 1.2.3 Navigation in the Technical Information
One of the fundamental tasks of the Paint Guide is the fast and precise allocation of the correct repair process to the concrete repair job in the workshop.
Section 4 of the guide provides basic instructions for navigating in the painting procedures. Depending on the selected paint supplier, the following
information is provided there for direct access:
1. Quick overview of all repair processes
2. Navigation via Sections 5, 6, 7, 8 with a description of the decision-making methods and the decision-making criteria
3. Overview by repair level in order to achieve a step-by-step overview of the selected procedure
F 1.2.3.1 Procedure for first-time users
As a first-time user, start with: -> G 4.2 "Method for deciding on the correct procedure". Here you will find a process table and a flow chart, which
shows the selection process schematically:
A) Defining the component material
B) Defining the component surface
C) Selecting the repair process
D) Selecting the painting procedure
E) Selecting the topcoat paint system
F) Selecting the clear lacquer system
All six decisions are explained in detail and the various decision-making options are listed. Proceed step-by-step here and define your repair job. This
gives you the combination of repair processes that correspond to your job and you can navigate through the selected procedure using the quick overview
or the process overview and start the repair job.
F 1.2.3.2 Procedure for advanced users/professionals
As an advanced user, you already know the individual criteria according to which you want to categorize your repair job. You can do this quickly and
immediately using various overviews:
-
Section G 4.1 and Section S 4.1 contain the "Quick overview - Quickfinder"
-
Section G 4.3 and Section S 4.3 contain an overview by repair level: "Overview based on repair level/materials"
F 1.2.4 Allocating the repair process - example for first-time users
NOTE:
The following example is adapted to the paint supplier "Glasurit", but applies equally to "Standox".
Our example
-
The vehicle to be repaired has slight damage to the paintwork on the rear spoiler
-
It is a Porsche Boxster 986
This is a source reference. Confirm exact model applicability in the original material.