Page 10
3.1.1.5 Series paint finish process of fiber-reinforced bodies
The Porsche series paint finish process consists of 18 operations:
1. Cleaning and degreasing the body's outer shell
2. Sanding outer shell of the body
3. Cleaning all dust off the body
4. Spraying the filler
5. Stoving the filler
6. Sanding the stoved filler
7. Spraying PVC undersealing on front apron and side member panels with a layer thickness of 0.6 to 1.0 mm.
8. Cleaning PVC spray dust off the body
9. Spraying the filler (in red, yellow, black, light gray or dark gray, depending on the color of the top coat paint)
10. Stoving the filler
11. Sanding the stoved filler
12. Washing the body off with deionized water
13. Drying the body in a hot-air oven and clean off all dust
14. Spraying the top coat paint
15. Flash off of top coat paint
16. Spraying on clear lacquer
17. Stoving clear coat
18. Painting the various passenger compartment parts black
3.1.1.6 Build-up of carbon-look paint finish
Layer thickness of carbon-look paint finish: approx. 60 (mu)m
3.1.1.7 Build-up of metallic and solid double-layer paint finish
This is a source reference. Confirm exact model applicability in the original material.