Page 175
Step 6a
NOTE:
For creeping clear lacquer application only.
1. Dilute clear lacquer with approx. 50% Glasurit(R) Blend-in Reducer 352-400.
2. Blend in spot-painting area with Glasurit(R) Blend-in Reducer 352-400.
3. Dry the area.
4. Dry the area again using an IR radiator.
5. Polish the area.
See: Section G7/G7.2 - Phase III C - Spot Painting Into Neighboring Section
G7.2 - Phase III C - Spot Painting Into Neighboring Section
G 7.2 Phase III C - Spot Painting Into Neighboring Section
G 7.2.1 Procedure using Glasurit(R) HS 2C Topcoat solid 22 line
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
This is a source reference. Confirm exact model applicability in the original material.