Page 195
G 8.2.4 Painting 996 Millennium rims
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
NOTE:
-
The Millennium wheels are subjected as standard to a complex surface treatment process.
-
The possibility for repair is limited to repairing the surface paint finish of the rims with clear lacquer.
-
It is not possible to remedy damage to deeper surface layers using equipment available in the workshop. It may be possible to re-coat the surface of
the rim.
G 8.2.4.1 Phase I - Preparing the rim
G 8.2.4.2 Phase IV - Clear lacquer finish
See: Section G8/G8.3 - Painting Spoilers
G8.3 - Painting Spoilers
G 8.3 Painting Spoilers
G 8.3.1 Basic procedure for painting spoilers
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
NOTE:
-
The new 928 spoiler must be baked for 30 minutes at 70-80° C.
-
This stabilizes the component in such a way that it cannot bend out of shape.
-
If possible, do not sand primer through to bare material on spoilers that are supplied primed ex-works.
G 8.3.1.1 Phase I - Preparation
This is a source reference. Confirm exact model applicability in the original material.