Page 341
S 8.3.1.2 Phase II - Primer
NOTE:
-
For GFK spoilers of type 996 Aerokit/GT2/GT3/Turbo, special insulation is required in areas with adhesion seams. These areas must therefore be
insulated twice using Standox(R) 2K Nonstop Primer Filler.
-
Primer filler and clear lacquer do not need to be elastic-rendered for this component. -> S 8.3.2 "Painting GFK/SMC spoilers"
The following procedure applies for all other spoilers:
This is a source reference. Confirm exact model applicability in the original material.