Page 343
S 8.3.2.3 Phase IV - Clear lacquer finish
See: Section S8/S8.4 - Front and Rear Apron
S8.4 - Front and Rear Apron
S 8.4 Front And Rear Apron
S 8.4.1 Basic procedure
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
NOTE:
-
When painting new front and rear aprons that have been primed and supplied by the factory, it is not necessary to prime the part prior to the
topcoat application.
-
Do not sand down factory-applied primer if possible.
The front and rear aprons are painted according to the procedure used for painting new plastic parts or surfaces:
New parts
Surface painting
This is a source reference. Confirm exact model applicability in the original material.