Page 365
S 9.2.2.3 Sanding metal and plastic components for spot-painting procedures
See: Section S9/S9.3 - S - Stopper
S9.3 - S - Stopper
S 9.3 S - Stopper
S 9.3.1 Standox(R) PE Soft Stopper
S 9.3.1.1 Processing
S 9.3.1 Standox(R) PE Soft Stopper
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
DESCRIPTION:
-
Universal polyester coarse and fine stopper
Properties:
-
Can also be used as a stain stopper
-
Good drawing properties
-
High creep strength
-
Excellent adhesion
-
Easy to sand
Base surfaces:
-
Hardened paintwork, sanded
-
Sheet steel, aluminum and UP-GF, sanded
-
Hardened Standox(R) 2K Universal Filler or Standox(R) 2K Nonstop Primer Filler, sanded
-
Galvanized sheetmetal
-
Please note base surface pre-treatment instructions:
-> S 5.1
-> S 9.2.2
NOTE:
-
Raw material base: Unsaturated polyester resin
-
Flash point: 32° C/89.6° F
-
Spec. weight: 1.83 g/cm3
-
Solid content: 85.8% weight/71.1% vol.
-
Storage: Polyester materials have a limited shelf life; always store in a cool place. Application within 12 months guarantees perfect results.
-
Do not use on acid primer, Standohyd(R) 1K Primer Surfacer, TPA paint finishes and elastic-rendered old paint finishes.
-
Do not apply below 5° C
-
Mix 2-3% Standox(R) Hardener Paste red and stopper well. Try not to overdose as this can result in discoloration of the final paint finish.
-
lean equipment after use with cleaning thinner
VOC value:
-
259 g/l
This is a source reference. Confirm exact model applicability in the original material.