Page 368
WARNING: -> 2 "Safety regulations" and read the product-specific safety instructions on the container labels.
Description:
-
Chrome-free wash primer for sheet steel, aluminum and galvanized base surfaces
Properties:
-
Glazing
-
Excellent corrosion inhibition
-
Triple-layer build-up
-
Optimum adhesion
Base surfaces:
-
Bare sheetmetal, sanded
-
Aluminum, sanded
-
Galvanized sheetmetal, sanded (do not sand through zinc coating)
-
Hardened paintwork, sanded
-
Please note base surface pre-treatment instructions:
-> S 5.1
-> S 9.2.2
NOTE:
-
Raw material base: Polyvinyl butyryl, corrosion inhibition pigments
-
Flash point: 26° C/78.8° F
-
Spec. weight: 0.96 g/cm3
-
Solid content: 26.0% weight/14.0% vol.
-
Theoretical yield: 8.8 m2/ltr. with a dry coat thickness of 8 microns
-
Clean equipment after use with cleaning thinner
VOC value:
-
708 g/l
NOTE:
-
Standox(R) Etching Adhesion Primer must always be used with Standox(R) 2K Universal Filler in triple-layer build-up.
-
Do not apply polyester, EP and water-dilutable products over this.
S 9.4.2.1 Processing
This is a source reference. Confirm exact model applicability in the original material.