Page 370
Properties:
-
Adheres to all paintable plastic parts on outside of passenger vehicles
-
Can be painted over or sanded wet-on-wet
-
Easy to handle
-
Efficient procedure
-
Ready to spray once hardener is added
Base surfaces:
-
PC
-
PP
-
PP/EPDM
-
PVC
-
ABS and SAN
-
UP- GF (formerly GfK)
-
PU-RIM
-
RTPU
-
PUR
-
PA
-
PPO
-
PBTP
-
Please note base surface pre-treatment instructions:
-> S 6.1
-> S 9.2.2
NOTE:
-
Raw material base: Special polymers
-
Flash point: 23° C/73.4° F
-
Spec. weight: 1.20 g/cm3
-
Solid content: 53.8-55.2% weight/36.9-37.9% vol.
-
Theoretical yield: 7.8 m2/ltr. with a dry coat thickness of 30 microns
-
Only use specified Standoflex(R) 2K Plastic Hardener
-
Do not store Standoflex(R) 2K Plastic Hardener below +10° C
-
Clean equipment after use with cleaning thinner
VOC value:
-
539 g/l
NOTE:
-
PE (polyethylene) and POM (polyoxymethylene) cannot be painted manually.
S 9.5.1.1 Processing
This is a source reference. Confirm exact model applicability in the original material.