Page 378
Base surfaces:
-
Hardened paintwork, sanded
-
Polyester products, sanded
-
Cleaned sheet steel, sanded
-
Factory primer and KTL, sanded
-
Aluminum and galvanized base surfaces must be pre-primed with Standox(R) Etching Adhesion Primer
-
Please note base surface pre-treatment instructions:
-> S 5.1
-> S 9.2.2
NOTE:
-
Raw material base: Acrylic polyurethane, corrosion inhibition pigments
-
Flash point: 26° C/78.8° F
-
Spec. weight: 1.41 g/cm3
-
Solid content: 61.3% weight/38.8% vol.
-
Theoretical yield: 7.5 m2/ltr. with a dry coat thickness of 50 microns
-
Theoretical yield: 4.2 m2/ltr. with a dry coat thickness of 90 microns
-
Clean equipment after use with cleaning thinner
VOC value:
-
545 g/l
WARNING: 2K paints react with moisture. All work equipment, mixing vessels, etc. must therefore be completely water-free.
S 9.6.1.1 Processing
This is a source reference. Confirm exact model applicability in the original material.