Page 383
-
Excellent filling properties
-
Good coverage
-
Suitable for spot painting
-
High yield
-
Organic solvent content: less than 10%
Base surfaces:
-
Standox(R) 2K Nonstop Primer Filler
-
Standox(R) 2K Universal Filler
-
Standohyd(R) 1K Primer Surfacer
-
Please note base surface pre-treatment instructions:
-> S 5.1
-> S 6.1
-> S 9.2.2
NOTE:
-
Raw material base: Special polymers that can be diluted in water
-
Flash point: 58-59° C/136-138° F
-
Spec. weight: 1.01-1.21 g/cm3
-
Solid content: 19.1-23.7% weight/22.5-37.3% vol.
-
Theoretical yield: 10.16 m2/ltr. with a dry coat thickness of 15 microns
-
The work materials must be suitable for water-dilutable products; refer to manufacturer's specifications
-
Collect left-overs from water-dilutable products separately from left-overs from conventional products. Otherwise, disposal will be more difficult,
may involve unnecessary extra costs and may even be impossible
-
Spot painting, -> S 7 "Spot-repair procedures"
-
Clean equipment before and after use with Standohyd(R) Demineralized Water
-
Clean again with cleaning thinner
VOC value:
-
232-430 g/l
S 9.7.3.1 Processing
This is a source reference. Confirm exact model applicability in the original material.