Page 3
5
-
Removing seals and retaining bracket at sides of roof frame?
The seal on the roof frame consists of two parts.
1. Pull the lower seal
-5-
out of the profile of the retaining strip
-7-
.
2. On the upper seal
-6-
with the retaining rail
-7-
, unscrew the Torx screws T15
-8-
and remove the seal
-6-
and the retaining rail
-7-
from the
roof frame.
6
-
Removing retaining rail and convertible-top seal on roof frame 1
1. Unscrew and remove the Torx screws T25
-9-
from the retaining rail
-10-
.
2. Unscrew the Torx screw T25
-11-
from the convertible top seal
-12-
.
3. Pull left and right convertible top seal
-12-
out of the roof frame towards the front in
-direction of arrow-
.
7
-
Removing convertible-top covering at sides of roof frame 1
-
Unscrew the fastening screws
-13-
from the roof frame
-15-
lift the shaped sheetmetal part
-14-
with convertible-top covering.
This is a source reference. Confirm exact model applicability in the original material.