Page 7
3.6
Fasten the convertible-top covering. Pull the removed convertible top covering towards the front, positioning it correctly and laying ((fold) it
creases free over the front edge of the roof frame. Press the self-adhesive strips on the convertible top material down and fasten initially with fixing
clips (Inset 10, figure 13). Screw the convertible top covering into place with the sheet metal screws B4x19, starting at the rear.
3.7
Fasten the retaining rail and the convertible-top seal on roof frame, (inset 1, figure 14). Remove the fixing clips, push in the convertible top seal at
the corners from the front, and fasten with the T25x12 Torx screws.
3.8
Fasten the seal at the side of the roof frame (in set 13, figure 14). The seal on the roof frame at the sides consists of two parts. Screw the up per
seal to the roof frame together with a retaining rail using the T15x9 Torx screws. Press the lower seal into the profile of the retaining rail.
3.9
Move the convertible-top from the service position to its initial position. To do so fold the tension bows downward and engage the tension cable
on the left and right hand sides.
This is a source reference. Confirm exact model applicability in the original material.