Workshop ManualsOriginal source
Convertible Top - Noises, Main Bow and Frame 3|Page 6936
Add to repair workspace
Page 10
24 -
Installing styling frame on roof frame 3
1. Screw on draught deflector
-46-
on the front face of the styling frame
-48-
with the fastening screw
-47-
.
Tightening torque:
1.7 Nm (1.0 ftlb.)
1. Position styling frame on roof frame 3
-8-
and tighten with fastening screws
-49-
.
Tightening torque:
1.7 Nm (1.0 ftlb.)
25 -
Installing styling frame on roof frame 2
1. Screw on fabric guide plate
-50-
and styling frame
-51-
with the torx screws T 15
-52-
and the washers
-52a-
.
Tightening torque:
1.7 Nm (1.0 ftlb.)
1. Position styling frame
-51-
on roof frame 2
-5-
. Adjust gap dimension
-A = 3.1 + 0.5-
between styling frames 2 and styling frame 3
-48-
.
Screw on fastening screws
-53-
and the washers
-53a-
.
Tightening torque:
9 Nm (7 ftlb.)
Installing seals on the styling frame
This is a source reference. Confirm exact model applicability in the original material.