Page 2
Note
:
Disengage the seat cover and roll it back until the adhesive film can be affixed between the cushion cut-outs (slits) in figures 1 and 2.
3.
Remove one side of the protective film on the double face tape.
4.
Affix the adhesive film on the seat cushion in the center between the two cushion cutouts (figure 2).
5.
Remove the other side of the protective film on the double4aced tape.
6.
Affix the seat cover on the double-faced tape (figure 3). To do so, pull the seat cover by the strip (pull the cover taut). Starting in the middle, press
the seat cover on the double-faced tape with the palm of your hand.
Note
:
If creases form or the assembly is incorrect, the seat cover positioning can be corrected again within 3 minutes. If the seat cover has to be removed
again at a later time, the double-sided tape does not have to be removed. A new piece of double-sided tape can be affixed right on top of the old
piece.
7.
Install the seat cover back on the seat.
8.
Install the seat back in the vehicle.
Working Time:
Literature:
911 Carrera (996) Technical Manual, Group 7
Repair: 72 0119 - Removing and installing the front seat
Boxster Technical Manual, Group 7
Repair: 74 13 19 - Removing and installing the cover for the front seat.
This is a source reference. Confirm exact model applicability in the original material.