Page 2
Part Information:
Materials:
Tools:
Socket wrench, hexagon socket a/f 5
T-wrench, hexagon socket a/f 4
Shop light
Various slotted and crosshead screwdrivers
Hexagon socket wrench a/f 10
Work Procedure:
1.
Work before painting.
1.1
Disassemble the Carrera rear spoiler and remove all fittings.
1.2
Mask all threads on the spoiler wing and grille. Mask and tie both plugs of the electrical wiring harness in the spoiler wing.
! WARNING
Damage or warping can occur on the spoiler wing and grille in the event of improper painting and drying processes.
>
Observe the specifications and instructions for the painting of plastics as outlined in the Paint Manual.
>
During the painting and drying process, properly place the parts (without stress) on the painting fixtures that are provided in the kit.
1.3
Note
:
The two-component HS filler must be sanded before the top paint is applied. The paint surface must not be touched without using protective
gloves! The cover with Porsche logo is supplied pre-primed (AKZ0 primer 01-69004). Some areas (logo) cannot be sanded, the cover must be
treated with a wet-on-wet filler (e.g. Standox non-stop filler-primer) before the top paint is applied. Paint the spoiler wing, grille and cover
with the Porsche logo in accordance with the Paint Manual.
2.
Preparatory work.
2.1
Remove battery cover, disconnect and cover the battery.
This is a source reference. Confirm exact model applicability in the original material.