Page 3
sleeve with some water for easier installation.
4.
Work on water drain to the left of the battery (arrows C, D and E) (change rubber sleeve).
4.1
Raise the vehicle with the platform lift until the wheels are free.
4.2
Carefully remove the rubber ring (arrow E) in the left wheel housing using a small slotted screwdriver or a pair of pointed-nose pliers.
4.3
Grip the drainage hose (arrow D) from the wheel housing using a pair of pointed-nose pliers and at the same time carefully press the rubber
sleeve (arrow C) downwards from above out of the body. Pull the drainage hose out of the body with the rubber sleeve.
4.4
Install new rubber sleeve 999.703.484.40. Dampen the outside of the rubber sleeve with some water for easier installation.
5.
Work on water drain on the outer left (arrow F) (remove rubber sleeve).
5.1
Press the rubber sleeve (with flap) into the wheel housing from the front cowl area side.
6.
In addition for 911 Carrera 4 (996): Work on water drain on the outer right (arrow G) (change rubber sleeve).
6.1
Remove rubber sleeve (with flap) upwards. To do so, grip the rubber sleeve from the top using pointed-nose pliers and press out of the body
from the wheel housing side.
6.2
Install new rubber sleeve 999.703.476.40. Dampen the outside of the rubber sleeve with some water for easier installation.
7.
Work on the right front cowl area cover (arrow H) (install clear plastic cover).
7.1
Clip the clear plastic cover, 996.572.661.00, into the rectangular recess (arrow H) of the right front cowl area cover.
8.
Lower the lifting platform.
9.
Reinstall front cowl area covers and battery cover.
Working Time
Literature:
911(996) Technical Manual, Group 7:
>
Repair: 70 22 19 Removing/installing cowl panel cover
>
Repair: 50 93 30 Cleaning front water drains
DISCLAIMER
This is a source reference. Confirm exact model applicability in the original material.