Page 1
Spoiler: Adjustments
Adjusting the Rear Spoiler
The raising and retracting travel of the rear spoiler may be limited and, hence, adjusted by setting the switching points of two microswitches
Note:
For items shown in this image, but not identified in the adjustment procedures, please refer to Service and Repair. See: Service and Repair
Adjusting the Microswitch for Retracting the Spoiler
Operate the service switch to retract the spoiler until the tab (A) of the toothed sector (53) is released in the opening (B) of the guide lever (C).
Unscrew hex nut (25).
Use the threaded pin (28) to adjust the switching point of the micro switch (27).
Tighten hexagon head nut (25) again.
Actuate the service switch to check the adjustment.
Adjusting the Microswitch for Raising the Spoiler
Operate the service switch to raise the spoiler until the lever (45) touches the buffer (55).
Use he threaded pin (28) to adjust the microswitch (37).
Actuate the service switch to check the adjustment.
This is a source reference. Confirm exact model applicability in the original material.